Publicité
Cleaning
Warning:
-
Do not spray the appliance with water or immerse it in water, otherwise you may suffer an
electric shock.
-
Keep the ventilation slots, tool body and handle clean.
-
Only use a cloth or brush to clean the sander.
-
Do not use cleaning products or solvents. Otherwise, it could get damaged.
-
Clean the sanding sheet with a vacuum cleaner or simply shake it off.
Storage
-
Keep the tool in a cool, dry place and out of reach of children.
-
Empty the dust collection tank before storing the tool.
6. TROUBLESHOOTING
Problem
The sander
does not start
The tool stops
working
The motor
slows down and
stops
The tool does
not sand
properly
Possible cause
It is not correctly connected
to the mains. The main circuit
breaker has tripped.
The power switch does not work
properly.
The motor is faulty.
There is a loose internal contact.
The power switch is broken.
The tool is not suitable for
sanding the workpiece you are
working on.
The sanding sheet you are using
is not suitable for the workpiece
you are working on.
The sanding sheet is worn.
Possible solution
Check the socket, power cable, plug
and circuit breaker. Repair of any of
these items must be carried out by a
qualified electrician.
Contact the official Cecotec
Technical Support Service.
Contact the official Cecotec
Technical Support Service.
Reduce the pressure exerted on the
sander.
Do not use the tool to sand that
part.
Use suitable sanding sheet.
Replace the sanding sheet.
PERFECTSURFACE 2120 ROTATE
ENGLISH
157
Publicité
