Publicité
-
Do not use force when inserting the battery. If the battery does not slide in easily, this
means that it is not being inserted correctly.
WARNING: before carrying out any maintenance or repair work on the tool, make sure that
the tool is switched off and the battery is removed.
4. OPERATION
-
Before using the sander, read the safety instructions carefully and get familiar with all its
functions.
WARNINGS:
-
Switch off the sander when handling parts or accessories, adjusting settings, cleaning or
when you have finished using it. This will prevent accidental starting, which could cause
injury.
-
Secure the workpiece correctly to prevent it from moving. We recommend that you use a
tool designed for this purpose, such as a vise, for instance.
-
Do not allow the sander or the workpiece to get too hot. Overheating increases the risk of
fire.
-
Please note that when working on it, the workpiece may become hot. Therefore, avoid
touching it until it is completely cool, otherwise you may burn yourself. Do not use
refrigerants or similar products.
Switching off/on the sander
Note:
-
Make sure that the supply voltage matches the rated voltage indicated on the sander's
marking.
-
Only use sanding sheet that is in good condition.
-
Do not use the same sanding sheet to work on different materials (e.g. metal and then
wood).
1.
Plug the power cable into the power supply.
2.
To switch it on, turn the power switch to the on position "I".
3.
To switch it off, turn the power switch to the off position "0".
Sanding
1.
Once switched on, move the sanding sheet over the workpiece you wish to work on.
Keep the power cable at the back of the tool and prevent it from coming into contact
with the sanding sheet.
PERFECTSURFACE 2120 ROTATE
ENGLISH
155
Publicité
