Publicité
ENGLISH
3. ASSEMBLY
Assembly instructions
WARNING: unplug the tool from the mains before making any adjustments or performing
any maintenance or repair operations, otherwise an electric shock may be produced.
3.1 Fitting/removing sanding sheets
Fig. 2
Note:
-
Clean the sanding pad before fitting the sanding sheet.
-
Only use sanding sheets of the correct size. If the sheet you use is larger than the pad, it
could tear and cause injury.
-
The pad is fitted with Velcro so that you can quickly attach the sanding sheet.
-
The sanding sheet is divided into two parts which can be replaced individually depending
on wear.
-
For optimum sanding results, only use sanding sheets of the correct grammage.
3.1.1 Fitting the sanding sheet
Place both parts of the sanding sheet on the pad and apply even pressure on them. Make sure
that they are aligned and that the holes match the holes in the pad.
3.1.2 Removing the sanding sheet
Remove the sanding sheet from the pad.
Note:
Do not use the tool unless both sides of the sheet are in place.
3.2 Fitting/removing/emptying the dust collection tank
Fig. 3
3.2.1 Fitting the dust collection tank
1.
Before fitting the tank, make sure that it is tightly closed.
2.
Insert the tank as far as it will go into the dust extraction port.
3.
To fix the tank securely, turn it clockwise.
3.2.2 Removing the dust collection tank
1.
To release the tank, turn it counterclockwise.
2.
Remove the tank.
152
PERFECTSURFACE 2120 ROTATE
Publicité
