Publicité
Keep cutting tools sharp and clean. Cutting tools
f)
properly maintained and with sharp cutting edges are
less likely to jam and are easier to handle.
Use the electric tool, accessories and drill bits, etc.
g)
according to these instructions, taking into account
work conditions and the work to be carried out. Use of
the power tool for operations other than those intended
could result in a hazardous situation.
Keep handles and gripping surfaces dry, clean and free
h)
of oil and grease. Slippery gripping surfaces do not allow
safe handling and control of the tool in unexpected
situations.
5) Use and care of the batteries
Only recharge with the charger specified by the
a)
manufacturer. A charger suitable for one type of battery
may create a fire hazard if used with another type of
battery.
Use the power tool only with specifically designated
b)
battery packs. Use of any other type of battery may
create a risk of injury and fire.
When the battery is not in use, keep it away from other
c)
metal objects, such as paper clips, coins, keys, nails,
screws or other small metal objects, which can establish
a connection from one terminal to another. A short circuit
between the battery terminals can cause burns or fire.
Under harsh conditions, liquid may leak from the battery;
d)
avoid touching it. In case of accidental contact, rinse the
affected part with water. If the liquid comes into contact
with eyes, seek medical assistance immediately. Liquid
leaking from the battery can cause skin irritation and
burns.
20
PERFECTSURFACE 2120 ROTATE
Publicité
