Publicité
OPERATING YOUR MACHINE
Select a Stitch
A. Reverse sewing lever
B. Three needle position dial
C. Stitch width dial
The stitch selector dial is used to select the stitch you want to sew. The dial can be turned to the left or to the right.
For sewing the grey stitch patterns
Turn the Stitch Selector Dial until it clicks in place under the
dot directly above the dial on the machine.
Set the Stitch Length Dial according to the length you want.
It can be set anywhere between 0.5 and 4, with 4 being the
longest setting.
For straight stitch sewing, the Stitch Width Dial can be set at 0
for the center needle position or 6 for the left needle position.
For sewing the blue or red stitch patterns
Turn the Stitch Selector Dial until it clicks in place under the
dot directly above the dial on the machine.
Set the Stitch Length Dial so that the S1 or S2 is lined up with
the dot above this dial. This dial must be set at the S1 marking
for the blue stitches or the S2 marking for the red stitches, or
the stitch pattern will not sew.
Set the Stitch Width Dial to a wide setting (4-6). If desired, you
can set it to a lower setting, depending on the look you want.
B
C
A
D. Stitch length dial
E. Stitch selector dial
OPERATING YOUR MACHINE
D
E
Stitch Width Dial
S1
S2
Stitch Width Dial
Stitch Length Dial
Stitch Length Dial
Operating Your Machine – 1 5
Publicité
