Publicité
OPERATION
Error Codes
If any error is detected, the programme is
interrupted and the error code is shown on
the display:
E1 - no cavity temperature sensor detected,
do not use the appliance
E2 - short circuit or damage to the cavity
temperature sensor, do not use the appli-
ance.
E3 - appliance overheated, do not use the
appliance until it has cooled down.
E4 - meat probe error - if the error disap-
pears when you unplug the meat probe, you
can use the oven with functions that do not
require a meat probe
E5 - meat probe is incorrectly inserted or
core temperature probe short circuit.
E6 - oven cavity temperature exceeding
320°C for functions other than pyrolytic
cleaning, or cavity temperature sensor mal-
function - do not use the appliance
Prob - meat probe inserted during the pyro-
lytic cleaning.
Use of the grill
The grilling process operates through
infrared rays emitted onto the dish by the
incandescent grill heater.
In order to switch on the grill you need to:
Set the oven knob to the position marked
grill
Heat the oven for approx. 5 minutes (with
the oven door shut).
Insert a tray with a dish onto the appro-
priate cooking level; and if you are grilling
on the grate insert a tray for dripping on the
level immediately below (under the grate).
Close the oven door.
For grilling with the function grill and
combined grill the temperature must
be set to 220ºC, but for the function fan
and grill it must be set to a maximum of
190ºC.
Warning!
When using function grill it is re-
commended that the oven door is
closed.
When the grill is in use accessible
parts can become hot.
It is best to keep children away from
the oven.
87
,
Publicité
