Publicité
OPERATION
Recommended meat probe temperature
settings
Type of meat
Pork
Beef
Veal
Lamb
Venison
Note: Only use the meat probe provided with
your appliance.
Pyrolytic cleaning
The P2.00 is flashing on the display and the
indicator is on. Turn the +/– knob to ad-
just the Duration to 2.00 - 2.30 - 3.00 hours.
Press
or wait 20 s to start pyrolytic clean-
ing.
The Pyrolytic cleaning programme comes
with special requirements.
First, the door status is checked: When the
oven door is open, the
and the appliance waits 10 minutes until the
oven door is closed and if it is not, the pyro-
lytic programme is cancelled.
When the door is closed the
on and the door is locked. The
is displayed and pyrolytic cleaning starts for
2.00 – 2.30 – 3.00 hours, depending on the
Duration you have set.
The appliance displays duration time left un-
til pyrolytic cleaning completes.
One hour before pyrolytic cleaning com-
pletes, the heaters are disconnected, the
temperature --- C is displayed and the appli-
ance stars cooling down.
The door is unlocked when temperature is
Temperature
[°C]
85 - 90
80 - 85
75 - 80
80 - 85
80 - 85
indicator flashes
indicator is
indicator
86
less than 150°C. The
the door is unlocked. The pyrolytic cleaning
programme ends, but you cannot continue
cooking.
No settings can be changed during the py-
rolytic cleaning and you cannot continue
cooking with these settings, however you
can view current settings and temperature.
When you silence the alarm, the appliance
always enters standby mode.
NOTE:
T
he oven door is equipped with a lock, which
prevents it from being opened during the cle-
aning process. Do not open the door so as
not to interrupt the cleaning process.
If there is a short power outage during py-
rolytic cleaning the appliance starts cooling
down and eventually unlocks the door.
If you interrupt the pyrolytic cleaning by turn-
ing the function selector knob to another po-
sition (such as 0), the appliance starts cool-
ing down and eventually unlocks the door.
When the door is unlocked the appliance
switches to standby.
If during pyrolytic cleaning you open the
door before it is locked, there will be an
[open door] beep and pyrolytic cleaning is
aborted.
Before starting the pyrolytic cleaning, please
see "Cleaning and Maintenance."
indicator is off when
Publicité
