Publicité
Model(s): 2357 • 2357CA
⚠
Grease build up can cause a fire. Clean any part of the
appliance that gets hot and experiences grease build up
after each use.
⚠
All cleaning and maintenance should be carried out when the
appliance is cool and everything is turned OFF.
• do NoT use abrasive pad on areas with graphics�
• If a bristle brush is used to clean any of the cooking surfaces,
ensure no loose bristles remain on cooking surfaces prior
to cooking�
APPLIANCE BODY:
Wash with warm soapy water and immediately wipe dry with a
non-abrasive cloth� (do NoT allow cleaning agents to rest on any
porous surface for a prolonged amount of time�)
NOTICE
DO NOT use Citrisol, abrasive cleaners, or a concentrated
cleaner on the appliance. This may result in damage to and
failure of parts.
APPlIANCe sToRAGe
⚠
DO NOT move the appliance when in use. Allow the appliance
to cool to 115°F (45°C) before moving or storing.
Cover your appliance with a hard or soft cover or carry bag (as appli-
cable) when stored outdoors� do NoT store where water will pool�
FIND MY COVER
BlackstoneProducts.com
• Covers
• Carry bags
BLACKSTONE PRODUCTS
WARNING
CAUTIoN
WARNING
OPERATION INSTRUCTIONS
CLEANING THE BURNER ASSEMBLY
spiders and insects can nest within and clog the burner/venturi tube
at the orifice�
To reduce chance of a flashback fire, the procedure below should
be followed at least once a month when spiders are most active or
when your appliance has not been used for a period of time�
Blocked burner
Blocked burner
Venturi
Venturi
Air intake
Air intake
VIDEO TUTORIAL
How to Clean Your Burner Tube
youtube.com/watch?v=xKQTCrFCzf8
ensure that the gas is turned oFF at control knobs and
STEP 01
gas supply�
• Remove griddle top�
• detach the burner�
Carefully lift the burner up and away from the gas
STEP 02
valve orifice�
Clean the inside of
STEP 03
the burner:
• Run a narrow bottle
brush through the burner
several times� (do NoT use
wire brushes)
• Use compressed air to blow
out the burner� (Wear eye
protection)
Brush entire
STEP 04
outer surface of burner to
remove grime�
Clean any blocked ports
STEP 05
with stiff wire such as an open
paper clip�
Carefully replace
STEP 06
burners and reattach, with
attention to the location of the
ignition needle�
The gas rail fuel nozzle
⚠
must be reengaged within the
burner opening�
| OWNER'S MANUAL
WARNING
⚠
A clogged burner can
lead to a fire beneath the
appliance.
Burner should be removed
and cleaned whenever
blockages are found.
Fuel nozzle
Fuel nozzle
Burner opening
Burner opening
19
Publicité
