Publicité
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
Model(s): 2357 • 2357CA
the griddle in place�
With the help of another person, place the griddle top and
STEP 19
hood onto the griddle body by aligning the four pins to the holes of
the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❷ ❷
❶ ❶
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Use four (4) M4x12 screws to attach the hard cover handles
STEP 21
to the top of the hard cover�
BLACKSTONE PRODUCTS
❷ ❷
❶ ❶
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
ASSEMBLY GUIDE
the griddle in place�
Use four (4) M6x12 screws
STEP 20
[l.]
to attach the left griddle lock and the right griddle lock to the
back of the griddle body and to either side of the griddle top�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Use two (2) M4x8 screws
STEP 22
attach the hard cover hook to the inside of the hard cover�
| OWNER'S MANUAL
[i.]
and two (2) M6 steel cap nuts
❶ ❶
❷ ❷
[k.]
and two (2) M4 nuts
[m.]
to
11
Publicité
