Publicité
All manuals and user guides at all-guides.com
SERVICE SETTINGS MANUAL
SERVICE SETTINGS
CONTROLLER PARAMETERS AND AUXILIARY TOOLS
All additional settings and adjustments of controller performance are carried out by means
of parameters. In controller parameter settings menu there are three selectable groups:
Basic parameters
Service parameters
Function parameters
You can only see those parameters which have an effect on the selected hy-
draulic scheme. Factory settings for parameters also depend on the selected
hydraulic scheme.
BASIC PARAMETERS
Basic parameters are divided into groups P1, P2 and P3. In group P1 there are setting for
differences and hysteresis for built-in thermostats, in group P2 there are settings for mini-
mum and maximum temperatures for individual sensors, and controller performance set-
tings in group P3.
When selecting the required parameter group in the menu, a new window opens:
Parameter mark
Diagram
of the setting
Parameter
description
(Help)
You modify the setting by pressing the button
you can edit it by pressing buttons
the button
. Now you can move by pressing buttons
rameter and repeat the procedure.
You exit the parameter settings by pressing button
S e r v i c e s e t t i n g s m a n u a l
Current parameter value
. The value of setting starts to flash, and
and
. The setting is confirmed by pressing
.
28
Current parameter value
The last confirmed
setting value
Factory value
Seting range
and
to another pa-
Publicité
