Publicité
CONNECTING
OPTIONAL
EQUIPMENT
CD DIGITAL OUT
(OPTICAL)
PHONO IN
VIDEO/AUX
IN
SURROUND
SPEAKERS
4
SUPER WOOFER d
Refer to the operating
instructions
of the connected
equipment
for details.
c The connecting
cords are not supplied.
Obtain the necessary
connecting
cords.
. Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AUX
IN JACKS
This unit can input analog
sound signals
through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(LD player, VCR, TV, etc.).
Connect
the red plug to the R jack, and the white plug to the L
jack.
PHONO IN JACKS
Connect
a turntable.
Use an Aiwa turntable
equipped
with a built-
in equalizer
amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output
CD digital
sound signals
through
this jack.
Use an optical
cable to connect
digital audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.).
Remove
the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack, Then, connect
an optical cable plug@
to the CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied
dust cap.
SUPER WOOFER q JACK
Connect
an optional
powered
sub woofer with a built-in amplifier
to the jack.
SURROUND SPEAKERS
d JACKS
Connect
the surround
speakers
to the SURROUND
SPEAKERS
jacks.
Connect
the right speaker
to the R jack,
and the left
speaker
to the L jack.
Standard positioning
Place the surround
speakers
behind the listening
area. Refer to
the Operating
Instructions
of the surround
speakers.
LISTENING TO EXTERNAL
SOURCES
To play equipment
connected
to the PHONO
IN or VI DEO/AUX
IN jacks, proceed
as follows.
1 Press the PHONO or VIDEO/AUX
button.
PHONO
or VIDEO
appears
on the display.
2 Play the connected
equipment.
To change a source name in the display
When
the VIDEO/AUX
button
is pressed,
VIDEO
is displayed
initially.
It can be changed
to AUX or TV.
With the power on, press the POWER
button while pressing
the
VIDEO/AUX
button.
Repeat
the procedure
until the desired
name
appears
on the
display.
To adjust
the sound
level
of the external
source
connected
to VIDEO/AUX
IN jack.
When the sound
level of the external
source
is much higher
or
lower than that of the other function
sources,
adjust it as follows.
1
Press the VIDEO/AUX
button and play the equipment.
2
Press the M
DOWN or ~
UP button to adjust the sound
level which is closest to the other function
sources.
MIN(minimum),
1 to 6 and MAX(maximum)
can be selected.
19
ENGLISH
Publicité
