Publicité
6
Repeat step 5 for the rest of the tracks for side
'PROGRAMMED EDIT RECORDING
The
programmed
edit function
enables
CD recording
while
checking
the remaining
time on each side of the tape as the
tracks are programmed.
2
1
8Jo
1
'2
3
4
5
4
3,7,8,9
5
3,5,7,
8,9
Insert the tape into deck 1 and wind up to the
beginning
of the front side.
Insert the tape with the side to be recorded
first facing
out
from the unit, and wind up the tape with the 4
button.
Press the CD button and load the disc(s).
Press
the
EDIT/CHECK
button
twice
while
pressing the SHIFT button on the remote control.
PRGM and E[)IT are displayed.
Press the numeric buttons on the remote control
to designate
the tape length.
10 to 99 minutes
can be specified.
Example:
When
using a 60-minute
tape, press the 6 and O
buttons.
Tape length
Tape side A (front side)
5
Maxim~m
recording
time for side A
Press one of the DISC DIRECT PLAY buttons to
select a disc and press the numeric
buttons to
program a track.
To select disc 4 or 5 from the remote control,
press the DISC
DIRECT
PLAY 4 or 5 button while pressing
the SHIFT button.
Example:
To select
the 10th track
of disc 2, press
DISC
DIRECT
PLAY 2 and the numeric
buttons+
10 and O.
A.
A track whose playing time is longer than the remaining
time
cannot
be programmed.
Total number
of
Programmed
programmed
tracks
tracks
I
7
8
9
Remain~ng
time
of side A
Press the EDIT/CHECK button while pressing the
SHIFT button to select side B and program the
tracks for side B.
After confirming
B on the display, repeat step 5.
Press the EDIT/CHECK button while pressing the
SHIFT button to select side A and press the
button on deck 1 to start recording.
CD play and recording
of edited tracks for the first side start
simultaneously.
When the end of the tape is reached,
deck
1 enters the recording stop mode. After entering the recording
stop mode, go to step
9.
Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control for recording
of the second side.
After confirming
B on the display, go to step 10.
10
Turn over the tape in deck 1 and press the
button.
~
flashes
for 10 seconds,
and then recording
starts.
To stop recording
Press the WA
button on deck 1. Recording
and CD play stop
simultaneously.
To
check the order of the programmed track numbers
Before recording,
press the EDIT/CHECK
button while pressing
the SHIFT butte;
to select side A or B, and press the M
DOWN
or FM UP button repeatedly.
Disc number
Tape side
Program
number
Track number
Programmed
track
numbers
To
chanae the moaram of each side
Press the-EDIT/CHE~K
button while pressing
the SHIFT button
to select side A or B, and press the
CLEAR
button to clear
the program
of the selected
side. Then program
tracks again.
To clear the edited program
Press the 9CLEAR
button
twice
in stop mode
so that EDIT
disappears
on the display.
m
The edit function
cannot be used with discs containing
31 tracks
or more.
ENGLISH
14
Publicité
