Publicité
To check the remaining time
During
play, press the EDIT/CHECK
button while pressing
the
SHIFT
button
on the
remote
control.
The
amount
of time
remaining
until all tracks finish
playing
is displayed.
To restore
the play time display,
repeat the above again.
PROGRAMMED
PLAY
discs.
m
When
loading
an 8-cm (3-inch)
disc, make sure to put it onto
the inner circle of the tray precisely.
Otherwise,
the disc may
be damaged
or the disc compartment
will not open.
If it does
not open, please consult
your Aiwa dealer for repair.
Do not
pli~ce
more than one compact
disc on one disc tray.
Do not tilt the unit with discs
loaded.
Doing
so may cause
malfunctions.
Up to 30 tracks can be programmed
from any of the inserted
When transporting
the unit, remove the discs from the trays,
When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
the AOPIEN/CLOSE
button, "ERROR
is displayed
and the disc
compartment
may not close. Remove
the disc on that tray.
RANDOM /REPEAT PLAY
Use the retmote control.
RANDOM
play
All the tracks
on the selected
disc or on all the discs can be
played
randomly.
REPEAT
play
All the tracks
on the selected
disc or on all the discs can be
played
repeatedly.
Press
the
RANDOM/REPEAT
button
while pressing the
SHIFT button.
Each
time
they
are pressed,
the function
can be selected
cyclically.
@ RANDOM
play
@ REPEKf_ play
@ RANDOM/REPEAT
play
~ Cancel
m
Even if the *I
button
is Dressed
dUrinCI RANDOM
PlaY, a
previously
played track can;ot
be skipped~The
unit returns to
the beginning
of the current
track only.
Direct selection
of the tracks with the numeric
buttons
is not
possible
during
RANDOM
play.
Use the remote control.
1
2
3
Press the PRGM button twice while pressing the
SHIFT button in stop mode.
The PRGM indicator
is displayed.
When the PRGM button is pressed
once in step 1, the unit
enters the KARAOKE
PROGRAMS
(page 16).
Press one of the DISC DIRECT PLAY buttons to
select a disc.
To select disc 4 or 5, press DISC DIRECT
PLAY 4 or 5 button
while pressing
the SHIFT button.
The selected
disc is indicated
in red on the display.
m
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
Selected
track number
Total number
of
selected
tracks
Program
r!umber
Total pl~ying
time
of
the selected
tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press the -
button to start play.
To check the program
Each time the +
or *
button
is pressed
in stop mode,
a
disc
number,
track
number,
and
program
number
will
be
displayed.
To clear the program
Press the
CLEAR
button in stop mode.
To add tracks to the program
Before
playing,
repeat
steps
2 and
3. The
track
will
be
programmed
after the last programmed
track.
To change
the programmed
tracks
Clear the program
and repeat all the steps again.
m
RANDOM
play is not performed
during
programmed
play.
During
the
programmed
play,
the
EDIT/CHECK,
DISC
CHANGE,
DISC DIRECT
PLAY and numeric
buttons
do not
function.
E/VGL/S/-/
10
Publicité
