Publicité
To operate the product
•
Hold the product with your two hands. If you
operate the product in the standard position,
hold the product near your body for a stable
work position.
•
If you operate the product at an extended
range, make sure that you have a stable work
position.
WARNING:
product at an extended range can
make you tired.
14
Operation of the
•
Start near the ground and move the product
up along the hedge when you cut the sides.
Make sure that the body of the product does
not touch the hedge.
WARNING:
front of the cutting equipment does
not touch the ground.
•
Use the 3 rear handles to operate the product
at different angles.
•
Be careful and operate the product slowly.
To clear material from the blades
1. Press the reverse button.
2. Press 2 power triggers. The blade operates in
the opposite direction momentarily.
3. Press the power triggers again. The blade
operates in the usual direction.
4. If it is necessary, do step 1-3 again.
To temporarily increase the blade speed
1. Start the product. Refer to
on page 13 .
Make sure that the
To start the product
1777 - 012 - 13.01.2025
Publicité
