Télécharger Imprimer la page

Husqvarna 320iHD60 Manuel D'utilisation page 12

Masquer les pouces Voir aussi pour 320iHD60:

Publicité

SAVE THESE
INSTRUCTIONS
Introduction
WARNING:
the safety chapter before you use the
product.
To do before you start the product
1. Examine the work area. Remove objects that
can be thrown out.
2. Examine the cutting attachment. Make sure
that the blades are sharp, and have no cracks
and damages.
3. Make sure that the product works correctly.
Examine that all nuts and screws are tight.
4. Make sure that the handle and safety devices
are not damaged and are attached correctly.
Do not operate a product with missing parts
or is changed from its initial specification. Use
protective gloves when it is necessary.
5. Make sure that the covers are not damaged
and are attached correctly, before you operate
the product.
To connect the battery charger
WARNING:
charger in ambient temperatures
between 41°F (5°C) and 104°F (40°C).
1. Connect the battery charger to the voltage
and frequency that is specified on the rating
plate.
2. Put the plug in a grounded power outlet. The
LED on the battery charger flashes red 1 time
and green 1 time.
To install the battery charger on the wall
CAUTION:
screwdriver to install the battery
charger to the wall. An electric
screwdriver can cause damage to the
battery charger.
12
Operation
Read and understand
Only use the battery
Do not use an electric
1. Install the battery charger on the wall with
the 2 screws (A). Use wall plugs (B) if it is
necessary.
A
A
2. Install the 2 screw hole plugs (C).
3. Connect the power cord (D) to the battery
charger and a mains socket.
To charge the battery
CAUTION:
battery, the battery charger and the
terminals on the battery are clean and
dry. Do not put the battery in the
battery charger if it is dirty or wet.
1. Connect the battery charger to a power outlet.
The charging LED flashes red 1 time and
green 1 time.
CAUTION:
battery charger to a power outlet
with the voltage and frequency
specified on the rating plate.
2. Connect the battery to the battery charger.
The charging LED comes on.
D
Make sure that the
Only connect the
1777 - 012 - 13.01.2025
B
C

Publicité

loading