Télécharger Imprimer la page

Lux Tools 178341 Notice Originale page 24

Publicité

GB
Table of contents
Getting started... . . . . . . . . . . . . . . . . . 24
For your safety . . . . . . . . . . . . . . . . . . . 25
Assembly . . . . . . . . . . . . . . . . . . . . . . . . 26
The product at a glance . . . . . . . . . . . . 26
Operation . . . . . . . . . . . . . . . . . . . . . . . . 27
Maintenance . . . . . . . . . . . . . . . . . . . . . 29
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 29
Transportation and storage . . . . . . . . . 29
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 29
Claims for defects . . . . . . . . . . . . . . . . 93
Getting started...
Proper use
The product conforms to state-of-the-art tech-
nology, as well as to the safety regulations
applicable at the time of being placed on the
market, when used for its intended purpose.
The product must be used only for grinding or
sharpening saw chains in compliance with all
safety precautions and directions in these
instructions for use.
This device is not intended for commercial
use.
Any other use is improper. Unforeseeable
damage may result from improper use, alter-
ations to the device, or the use of parts that
have not been checked and approved by the
manufacturer!
Any improper use or any activities on the
product not described in these instructions for
use are considered inadmissible misuse and
outside of the manufacturer's legal liability.
Symbols used
Hazard warnings and information signs are
clearly marked in the original instructions for
use.
The following symbols are used:
Read the original instructions for use
before use.
Observe all safety information.
DANGER! Type and source of
danger! Failure to observe the haz-
ard warnings can put life and limb at
risk.
WARNING! Type and source of
danger! Failure to observe the haz-
ard warning can put life and limb at
risk.
CAUTION! Type and source of
danger! This hazard warning warns
against damage to the product, envi-
ronment or other property.
Note: This symbol identifies infor-
mation that is provided to improve
understanding of the processes.
24
Translation of the origin al instructions
Chain sharpening tool

Publicité

loading