Télécharger Imprimer la page

Geberit SIGMA10 Manuel D'entretien page 39

Masquer les pouces Voir aussi pour SIGMA10:

Publicité

Menu item
Description
The minimum detection time in the
user detection range is set so that
users can be detected as a
[Detection time]
standing or seated user. The
detection time is only relevant
when automatic flush actuation is
activated.
As soon as an object is located in
the detection range, the red LED
in the sensor window lights up. No
flush is actuated. The function
switches off automatically after 10
minutes.
• User recognition: The sensor for
the user recognition detection
range is activated. LED lights up
and app turns green = User has
been detected.
• Manual flush actuation: The
[Detection range]
sensor for the manual flush
detection range is activated.
LED lights up and app turns
green = Hand has been
detected.
• Proximity detection: The sensor
for the proximity detection range
is activated. LED lights up and
app turns green = User is
moving in the detection range.
The [detection range] for user
recognition can be adjusted in 3
steps.
The current settings are saved in
[Save as
the app, which means they can be
presetting]
transferred to other devices of the
same type.
[Restart end
The WC flush control is restarted.
device]
All functions are reset to factory
[Factory settings]
settings.
27021602280603019 © 09-2024
970.755.00.0(03)
Application
• To prevent flushes due
to unintentional entry of
a person into the user
detection range
• To check the user
recognition
• To optimise the
detection range for user
recognition
• To commission several
devices with the same
settings
• To remedy
malfunctions
• To remedy
malfunctions
Value
Factory
setting
1–60 s
7 s
[User recog-
nition],
[manual
flush
actuation],
[proximity
detection]
Short
Medium
Medium
Long
4 / 4
39
EN

Publicité

loading