Publicité
1. Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface.
T hese marks are removable using the C E R AMA
BR Y T E
C eramic C ooktop C leaner with the C E R AMA
®
BR Y T E
C leaning Pad for C eramic C ooktops.
®
S pecial care should be taken when removing hot substances
S ugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your
cooktop (not covered by the warranty) unless the spill is removed while still hot. S pecial care should be taken when
removing hot substances.
Be sure to use a new, sharp razor scraper.
1. T urn off all surface units. R emove hot pans.
2. Wearing an oven mitt:
the spill to a cool area on the cooktop.
b. R emove the spill with paper towels.
22
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.
T his should be removed immediately before heating
again or the discoloration may be permanent.
C arefully check the bottom of pans for roughness
that would scratch the cooktop.
3. Any remaining spillover should be left until the surface
of the cooktop has cooled.
residue has been completely removed.
If pitting or indentation in the glass surface has
already occurred, the cooktop glass will have to be
replaced. In this case, service will be necessary.
.
Publicité
