General Guidelines - Perel CFAN0460 Mode D'emploi

• Do not cover the device when in use. Do not insert any object
through the grilles. This may damage the device or result in
harmful situations.
• The device is fitted with an overload cut-out circuit which will
operate of the motor overheats or is stalled. If the device
overheats or stalls, disconnect from the mains immediately and
allow the motor to cool down.
3.

General Guidelines

•
Refer to the Velleman
•
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will
void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical...) arising from the possession,
use or failure of this product.
•
Keep this manual for future reference.
4. Operation
1. Place the fan on a flat, stable and non-slippery surface.
2. Make sure the device is switched off. Connect to the mains. If connecting via an extension
lead, make sure that the lead is rated at 3 A or more, and that it is fully unwound.
3. Switch on the device.
4. Switch off and unplug from the mains after use.
It is normal for the motor to become warm during normal use.
V. 03 – 24/11/2020
CFAN0460/CFAN0475/CFAN0490
®
Service and Quality Warranty on the last pages of this manual.
switch position
0
1
2
3
speed
off
low speed
medium speed
©Velleman nv