Publicité
English
INSTALLATION OF MIRRORS
Attaching the mirrors
• Fold the rubber back on itself
• Turn the locknut on the mirror, making sure the screw is on the outside
• Position the mirror with the hole in the handlebar, turn the mirror until it comes to a stop, then adjust the position by sitting on the TilChap so that you have a good rear view,
then lock the position using a 14 mm open-end wrench.
• Unfold the rubber until it covers the base of the mirror. If necessary, turn the rubber until it fits the base of the rear-view mirror perfectly
• Sit on the seat to adjust the mirrors to your position.
Page 57
Publicité
