Publicité
THE BATTERY
Inserting the battery
• Open the cover by turning the key
• Put the battery in the compartment
• Connect the plug to the battery terminal
• Switch on the circuit breaker
• You will hear a "click" when it is properly connected
Removing the battery
• Open the cover
• Turn the blue ring on the battery cable and pull the plug
• Remove the battery
Your battery has a serial number. It is assembled in a special shell.
Under no circumstances should you attempt to open it.
Any breach of the warranty label will automatically void the
warranty.
For safe charging, first connect the charger to the mains socket (220V/
50 Hz) and then connect the charger to the battery.
Turn the key to unlock
Page 51
English
Turn off the TilChap. Lift the battery cover
Lift the battery by the handle
Publicité
