Fein Slugger JMU 137 QW Mode D'emploi page 29

Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
Application tools, coolant container, contact
protector
Drill-motor guide (figure 19).
After several hours of operation, the play in the drill-motor guide can increase. As a conse-
quence, the drill motor can glide alongside the drill-motor guide by itself. Malfunctions are
possible in machine operation. In this case, retighten all fastening screws of the drill-motor
guide correspondingly so that the drill motor can easily be moved manually, yet does not
glide by itself.
Fig. 19
2,5 mm /
3/32 in
2,5 mm /
3/32 in
2,5 mm /
3/32 in
en
29