Fein Slugger JMU 137 QW Mode D'emploi page 11

Technical description and specifications.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Not all accessories described or shown in this instruction manual will be included with your-
power tool.
Drill-motor cable
Viseo Touch Pad
Tool holder
Application tool
Chip guard
Starts the drill motor in inch mode
Rotation direction: anticlockwise
Speed reduction in steps
Stops the drill motor
Coolant container
Magnetic foot
PRCD (*) personal
protection switch
Spoke handle
Clamping strap
Switches the magnet On/Off
Starts the drill motor
Rotation direction: clockwise
Speed increase in steps
en
11
Fig. 1
Fig. 2