Publicité
4. Start the vehicle.
5. As soon as the vehicle is started, remove the jumper cable from the vehicle battery. Leave the
vehicle's engine running.
Charging Cell Phone or Tablet Instruction:
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Touch the switch button, it can recognise eletronic products's suitable parameters, start to
charge for mobile phone/tabletc etc.
For power supply to vehicle products or electronics
1. Plug the optional switch cable to 15V 10A output port.
2. Connect the optional switch cable and vehicle product or electronics.
3. Press the switch button to power supply.
GREEN LIGHT on: Telling the
connection is correct and the
circuit is working, you can turn
on the engine to jump-start
directly.
GREEN LIGHT blinking with
buzzing: Saying the vehicle
battery is low, press the
"BOOST" button, wait for the
GREEN LIGHT to become solid,
then turn on the engine within
30s.
NOTE : WHEN BOOST BUTTON
IS PRESSED, BOOSTER
WORKS WITHOUT ANY
PROTECTION
RED LIGHT on with buzzing:
Telling the connection is
wrtong, and buzzing to
alarm to correct the clamps
as step 2 mentioned above,
wait until the GREEN LIGHT
is on to turn on the engine.
No Lights on, No buzzing:
Saying the vehicle's
battery maybe damaged,
after confirm the clamps
connection is correct, press
the "BOOST" button, wait
GREEN LIGHT is on, and
then turn on the engine
within 30s.
Publicité
