Frigidaire Gallery GDPH4515AF Guide De Démarrage Rapide

BEFORE YOU START
Set up your dishwasher
Make sure the top rack, bottom rack and silverware
basket are in place prior to operating the dishwasher.
See OPERATING INSTRUCTIONS in the Use & Care
Manual.
YOU'RE IN CONTROL
Your dishwasher controls
To begin using your dishwasher, open the door and select one of the cycle options from the control
panel. The Wash and Dry settings can be adjusted based on the cycle chosen. Indicator lights
illuminate as each cycle or option is selected.
1 2 3 4
† Cycle uses a soil sensing feature to determine the
best wash performance. The soil sensing feature
automatically engages when selecting the HEAVY,
NORMAL, or ENERGY SAVER wash cycles.
6
8 9 10
REMEMBER
• Select cycles and options with the
door open. Press START immediately
before closing the door.
• To add an item, press START again
immediately before closing the door
to resume the cycle.
• Load rack so large items do not
block the spray arm or detergent
dispenser.
Have a question?
owner support
frigidaire.com / 1 (800) 374-4432 frigidaire.ca / 1 (800) 265-8352
Get started with your
Gallery Dishwasher
Fill Rinse Aid dispenser
Rinse aid greatly improves drying and reduces water
spots. Twist off the rinse aid dispenser cap and fi ll
until the indicator reaches full, then replace the cap.
1. Select HEAVY WASH† for heavily soiled loads of
pots, pans, casserole dishes and dinnerware.
2. Select NORMAL WASH† for light to heavily soiled
loads.
5
3. Select QUICK WASH (34 minutes) for lightly soiled
loads only.
4. ENERGY SAVER† uses less energy by washing
lightly soiled loads with less water and the air dry
setting.
5. Select RINSE ONLY for rinsing dishware that will be
washed later.
6. START/Cancel starts or cancels a cycle. To start the
cycle, press START/Cancel button and immediately
close the dishwasher door. To cancel the cycle,
open the dishwasher door, then press and hold the
START/Cancel button for 3 seconds until the cycle
and option LEDs turn off.
7
7. The INDICATOR LIGHTS provide cycle status
information showing washing (dishwasher is
running), clean (non-sanitized) and sanitized (clean
with sanitized option).
8. WASH TEMP provides the choice of Sanitize, High
Temp or Normal water temperature.
9. DRY provides the choice of MaxBoost™ (extended
dry time), Heat (normal dry time) or Air (air dry
11
only).
10. DELAY TIME sets a delayed starting time to begin
the wash cycle from 2, 4, or 6 hours.
11. CONTROL LOCK locks the dishwasher controls to
prevent children from starting the dishwasher or
accidentally changing the wash cycle. Press and
hold until the lock LED comes on to lock. Press
and hold until the lock LED goes off to unlock the
controls.
Want help?
QUICK START GUIDE
QUICK CARE
FAQs
Why won't my dishwasher start?
To start a new wash cycle or resume a cycle after adding a dish,
press the START button immediately before closing the dishwasher
door. If the door remains opened after pressing the button, the unit
will not start. Open the door, press the START button again and
immediately close the door.
What do I do if my dishes are not as dry as expected?
Try using a rinse aid if your dishes are not as dry as you like. These
products help eliminate spots and residue and help with drying
and cleaning performance. You can also select the MaxBoost™ Dry
setting which extends drying cycle time while improving drying
performance.
Why aren't my dishes clean?
Avoid nesting dishes and silverware or overcrowding the
dishwasher. Proper loading of racks and silverware baskets
improves cleaning and drying performance. See the Use & Care
manual for proper loading procedures.
Find more troubleshooting tips in the back of the Use & Care
manual, on our website under FAQs, or view our Frigidaire videos
on www.youtube.com/Frigidaire.
LET'S MAKE IT OFFICIAL!
Take the fi rst step to becoming a part of the Frigidaire family by
registering your new dishwasher.
Need service?
Look for the QR code on your appliance or registration card.
If installed with a garbage disposal
Ensure the knock-out plug is removed so the
dishwasher can properly drain. See the Installation
Instructions for further details.
A little love goes a long way
Your Dishwasher has a glass trap fi lter to catch excess food
particles. Clean the trap monthly to keep your dishwasher
working as expected. See Emptying the glass trap below.
Be gentle
Clean the interior with warm water and mild soap using a
dishcloth or sponge. Use Frigidaire ReadyClean™ Stainless
Steel cleaner, available on Frigidaire.com, and wipe with
the grain to keep the exterior clean and shiny.
Emptying the glass trap.
1. Press down on the center of the wash arm and rotate
the glass trap handle clockwise to disengage.
2. Lift the spray arm and glass trap out of the
dishwasher.
3. Empty the glass trap.
4. Place the assembly back into position, press down
on the arm at the center and rotate the glass trap
handle counterclockwise back into place.
5. Avoid damage and verify that the glass trap and
wash arm are snapped in place. See the Use & Care
Manual for more information.