Publicité
GB
MT
19
Auxiliary handle
20
Depth stop
21
Release (Carpet knife)
22
Carpet knife
23
Slider (Carpet knife)
24
Metal box (Drill)
25
Storage box (Screw bit)
26
Bit receptacle
27
Ratchet screwdriver
28
Screwdriver bit holder
29
Measuring tape
29.1 Locking button (Measuring tape)
29.2 Locking slider (Measuring tape)
29.3 Clip (Measuring tape)
30
Storage case
31
Battery charger
Fig. B
32
Screw bit
33
Drill
Fig. C
34
Handle (Auxiliary handle)
35
Locking screw of depth stop
Description of functions
Cordless impact drill screwdriver with two-
speed gearbox has 21 torque settings,
as well as one drill setting and one im-
pact setting, right/left rotation. The tool
is equipped with a keyless chuck and an
LED work light.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Impact Driver
............................ PSBSAP 20-Li C3
Rated voltage U ............................. 20 V ⎓
26
Weight with battery (20 V, 2 Ah) ≈ 1.9 kg
No-load rotation speed n
– Level 1 ............................... 0–630 min
– Level 2 .............................0–2100 min
Impact rate
–Level 1 ............................. 0-10810 min
–Level 2 ............................. 0-36000 min
Max. torque .................................... 64 Nm
Chuck capacity ............................. ≤13 mm
Max. drilling diameter
–wood ............................................. 68 mm
–Concrete ........................................16 mm
–steel ............................................... 13 mm
Protection type ..................................... IPX0
Idle
Sound pressure level (L
...................................... 80.9 dB; K
Sound power level (L
..................................... 88.9 dB; K
Impact drilling
Sound pressure level (L
...................................... 98.3 dB; K
Sound power level (L
...................................106.3 dB; K
Vibration Drilling (a
h,D
–Main handle ... 3.280 m/s²; K=1.5 m/s²
–Auxiliary handle
............................ 4.636 m/s²; K=1.5 m/s²
Vibration Impact drilling (a
–Main handle .13,283 m/s²; K=1.5 m/s²
–Auxiliary handle
............................ 7.645 m/s²; K=1.5 m/s²
Battery ................................................. Li-Ion
Temperature ................................... ≤50 °C
– Charging ................................4 – 40 °C
– Operation ......................... −20 – 50 °C
– Storage .................................. 0 – 45 °C
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1
– frequency band .... 2400–2483.5 MHz
0
−1
−1
−1
−1
)
pA
=5 dB
pA
)
WA
=5 dB
WA
)
pA
=5 dB
pA
)
WA
=5 dB
WA
)
)
h,ID
Publicité
