Frigidaire FDPC4221AW Guide De Démarrage Rapide

BEFORE YOU START
Set up your dishwasher
Make sure the top rack, bottom rack and silverware
basket are in place prior to operating the dishwasher.
See OPERATING INSTRUCTIONS in the Use & Care
Manual.
YOU'RE IN CONTROL
Your dishwasher controls
To begin using your dishwasher, open the door and select one of the cycle
options from the control panel. The Wash and Dry settings can then be
adjusted based on the cycle chosen. Indicator lights will illuminate as each
cycle or option is selected.
1. Select HEAVY WASH/POWER PLUS* for pots, pans, casseroles and dinnerware
having light to heavily soiled loads.
2. Select NORMAL WASH* for light to heavily soiled loads.
3. Select 30 MIN WASH/QUICK WASH* for lightly soiled loads only.
4. Select CHINA CRYSTAL* for lightly soiled China, Crystal or other delicate items.
5. Select TOP RACK* for light to heavily soiled small loads in the upper rack.
6. ENERGY SAVER* uses less energy by washing lightly soiled loads with less water
and the air dry setting.
7. Select RINSE ONLY for rinsing dishware that will be washed later.
8. FAVORITE CYCLE/ MY FAVORITE* program saves preferred cycle and options to
a one touch control. See Use & Care instructions for details.
9. WASH PRESSURE provides the choice of Scour (extra heavy soil), Surge (heavy to
normal soil) or Spray (light soil).
10. WASH TEMP provides the choice of Sanitize, High or Normal water temperature.
11. DRY options offer the choice of extended dry time (MaxBoost/Max Dry), Heat
(normal dry time) or Air (air dry only).
The HEAT DRY option in combination with rinse aid will enhance drying
performance.
The 30 MIN WASH/QUICK WASH cycle can add the fan drying system during the
drying cycle. Press the DRY pad, then select the HEAT option. This option will
turn the fan on during the dry cycle to support drying performance. This option
extends the cycle 30 minutes.
Press and hold the Dry button until the lock icon comes on to lock the dishwasher
controls. Press and hold the Dry button until the lock icon goes off to unlock the
controls.
12. DELAY TIME sets a delayed starting time to begin the wash cycle.
13. START/Cancel starts or cancels a cycle. To start the cycle, press START/Cancel
button and immediately close the dishwasher door. To cancel the cycle, open the
dishwasher door and press the START/Cancel button until the cycle and option
LEDs turn off.
14. STATUS WINDOW* will display remaining time in cycle, delay time setting or
"close door" reminder.
15. INDICATOR LIGHTS* provide cycle status information showing delayed (delay
start), clean (clean
* Your machine may not have all options or features listed above.
REMEMBER
• Select cycles and options with the door open. Press START immediately
before closing the door.
• To add an item, press START again immediately before closing the door to
resume the cycle.
• Load rack so large items do not block the spray arm or detergent dispenser.
Get started with your
Fill Rinse Aid dispenser
Rinse aid greatly improves drying and reduces water
spots. Twist off the rinse aid dispenser cap and fi ll
until the indicator reaches full, then replace the cap.
Have a question? Want help?
Scan the QR Code to the right
or visit frigidaire.com • frigidaire.ca for owner support
Dishwasher
QUICK START GUIDE
If installed with a garbage disposal
Ensure the knock-out plug is removed
so the dishwasher can properly drain. See the
Installation Instructions for further details.
QUICK CARE
A little love goes a long way
Your Dishwasher has a glass trap fi lter to catch excess food particles. Clean the
trap monthly to keep your dishwasher working as expected. See Emptying the
glass trap below.
Be gentle
Use Frigidaire ReadyClean ® Stainless Steel cleaner (Item # 5304508691),
available on Frigidaire.com, and wipe with the grain to keep the exterior clean and
shiny.
Use Frigidaire ReadyClean ® Dishwasher Cleaner Tablets (Item # 10FFPRDT01)
to clean and freshen the interior of the dishwasher.
Place one tablet in the bottom of the empty dishwasher tub (not the dispenser),
run a rinse/spin cycle, leave washer door closed for at least 6 hours, then resume
normal use. One tablet used monthly is recommended for best results.
Emptying the glass trap.
1. Pull the glass trap handle up and out toward you to remove.
2. Empty any debris collected in the glass trap.
3. Once empty, slide the glass trap back into the same location as when
removed, then push down to lock back into position. See the Use & Care
Manual for more information.
FAQs
Why won't my dishwasher start?
To start a new wash cycle or resume a cycle after adding a dish, press the START or
START/CANCEL button immediately before closing the dishwasher door. If the door is
closed when the START or START/CANCEL button is pressed or the door remains opened
for more than 4 seconds after pressing the button, the unit will not start. Open the door,
press the START or START/CANCEL button again and close the door immediately.
What do I do if my dishes are not as dry as expected?
If your dishes are not as dry as you like, try using HEAT DRY option in combination with
rinse aid will enhance drying performance. Rinse aids help eliminate spots and residue
and aid with drying performance. The HEAT DRY option in combination with rinse aid will
enhance drying performance.
Why aren't my dishes clean?
The proper loading of racks and silverware basket improves cleaning and drying
performance. See Use & Care Guide for proper loading procedures.
Find more troubleshooting tips in the back of your Use & Care Manual, on our website
under FAQs or view our Frigidaire videos on www.youtube.com/Frigidaire.
LET'S MAKE IT OFFICIAL!
Take the fi rst step to becoming a part of the Frigidaire family by registering your new
dishwasher.
Look for the QR code on your appliance or registration card!
Need service?