HP Photosmart C4200 Serie Guide D'utilisation page 7

(continued)
Label Icon
6
7
8
Find more information
A variety of resources, both printed and onscreen, provide information about setting up
and using the HP All-in-One.
• Setup Guide
The Setup Guide provides instructions for setting up the HP All-in-One and installing
software. Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, see Troubleshooting in the last section of the
Setup Guide, or see
• Onscreen Help
The onscreen Help provides detailed instructions on features of the HP All-in-One
that are not described in this User Guide, including features that are only available
using the software you installed with the HP All-in-One.
• www.hp.com/support
If you have Internet access, you can get help and support from the HP Web site. This
Web site offers technical support, drivers, supplies, and ordering information.
Load originals and load paper
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
To load an original on the scanner glass
1. Lift the lid on the HP All-in-One.
2. Load your original print side down on the right front corner of the glass.
TIP:
edge of the glass.
Name and Description
Scan button: Starts a scan. When a memory card is inserted,
this button advances to the next photo on the memory card
when pressed.
Start Copy Black button: Starts a black-and-white copy. In
certain situations (for example, after clearing a paper jam), this
button resumes printing. When a memory card is inserted, this
button acts as a previous image button.
Start Copy Color button: Starts a color copy. In certain
situations (for example, after clearing a paper jam), this button
resumes printing. When a memory card is inserted, this button
starts printing the image currently on the display.
"Troubleshooting and support" on page 15
For more help on loading an original, refer to the engraved guides along the
in this guide.
Find more information 7