Publicité
Unpacking
Carton Contents
• Electric pressure washer with lower frame assembly
• Upper frame
• Upper frame panel
• Spray wand
• Trigger gun
• High-pressure hose
• Wheels and hubs (x2)
• 0º (red) Quick-Connect nozzle
• 15º (yellow) Quick-Connect nozzle
• 40º (gray) Quick-Connect nozzle
• Hardware: washers (x6), cotter pins (x4), wheel spindles (x2),
M6 machine screws (x2) and M6 nuts (x2)
• Needle clean-out tool (included with manual packet)
• Manual with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Instead,
please call the Snow Joe
center at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
materials until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging materials are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
1.1. Assemble 1 washer between cotter pin and wheel. Slide
into wheel and snap wheel hub into place while lining up
the arrows (Fig. 1.1).
Fig. 1.1
Cotter pin
Washer
+ Sun Joe
customer service
®
®
Wheel axle
1.2. Place a washer on each side of the wheel spindle
and insert the wheel axle into the spindle.
Fig. 1.2
Wheel spindle
2. Fix the wheel by inserting the cotter pin into the hole on
the end of the wheel axle, as shown (Fig. 2).
Fig. 2
3. Repeat the above steps for the other wheel.
4. Slide the upper frame into lower frame assembly. They
snap together using spring-loaded push buttons and
require no screws (Fig. 3).
Fig. 3
Upper
frame
Lower
frame
assembly
6
Washer
Washer
Wheel axle
Cotter pin
Publicité
