7�3 Disposal
Dispose of the device in accordance with local regulations. If you have any questions, please contact the
local authorities responsible for waste disposal.
8� Technical Specifications
Model:
Heating Pad Size:
Power supply:
Wattage:
Pad Material:
Timer:
Temperature levels:
Operating Conditions:
Storage Conditions:
9� Troubleshooting Guide
Problem
The heat indicator light is not illuminated while
• The controller is properly connected to the heating
pad.
• The mains plug is connected to the working elec-
trical outlet.
• The sliding switch is set to 1,2,3,4,5 or 6.
10� FCC Compliance Information
Heating Pad UHP 27
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
UHP 27
12 x 24 in (30.5 x 61 cm)
120 V / 60 Hz
50 W
100% polyester
120 minutes
6 levels
Level 0: OFF
Level 1: minimum heat
Level 2-5: medium heat
Level 6: maximum heat
32°F to 95°F (0°C - 35 °C)
< 80% humidity
23°F to 104°F (-5°C to 40°C)
< 80% humidity
Cause
The safety system has
switched the heating
pad off permanently.
6
Solution
Send the heating pad
and the controller for
servicing