Publicité
NOTICE
• Only use the heating pad together with the control unit specified on the label. Otherwise the
heating pad could be damaged.
• With the heating pad switched on, never place any sharp object or any heating source such as
a hot-water bottle, heating pad or similar items on it.
• The electronic components inside the control unit will heat up whilst operating the heating pad.
Therefore never cover the control unit or place it onto the heating pad during operation.
• Protect the heating pad from knocks, damp, dust, chemicals, marked temperature fluctuations
and nearby sources of heat (ovens, heaters).
2� Package Contents
1x Heating Pad UHP 27
1x Controller with Power Cord
1x Instruction Manual
3� Parts and Controls
1. Controller
2. Heating pad
3. Mains plug
4. Cord
5. Control Connector
6.
Slider
for ON/OFF and
temperature settings
7. Heat indicator light
8. Heating Pad
Connector
4� Intended Use
This heating pad is intended for applying heat to the human body. It is not suitable for use in hospitals or for
any other commercial use. In particular, it should not be used for babies or infants, persons who are insensitive
to heat, helpless persons, or animals. Any use not described above, or modifications of the heating pad are
not permissible and may lead to injury and /or damage to the heating pad. The manufacturer assumes no
liability for damage due to improper use.
5� To Set Up
NOTICE
1. To begin, first connect the control connector to the heating pad connector.
2. Plug the power plug into a 120V AC electrical outlet.
6� To Use
Switching On
Set the controller to the highest temperature setting (setting 6). This will cause the heating pad
to warm up quickly. The heat indicator light illuminates after the heating pad is switched on.
When using the heating pad for several hours, set it to the lowest temperature setting (setting 1).
1
4
7
8
5
6
2
4
3
Publicité
