Télécharger Imprimer la page

Powersmart V8721C1 Manuel D'instructions page 12

Publicité

4. Insert the recoil starter handle cable into the hook provided on the upper handle. You must engage the start/stop
control to release the recoil starter handle.
Recoil starter
handle
SIDE DISCHARGE CHUTE
To convert mower for side discharge, the grass catcher has been removed and that the rear discharge door is
closed.
1. Lift the spring-loaded discharge cover located on the side of the mower.
2. Slide two hooks of the side discharge chute under the hinge pin,align the two holes on the side discharge
chute with the protrusions on the deck. Then lower the spring on the side discharge cover.
Caution: Do not attempt to remove the permanently mounted spring loaded side discharge cover at any time.
12
Start/Stop Control

Publicité

loading