To Attach Child's Tray - topmark RILEY Mode D'emploi

ASSEMBLING
TO ATTACH CANOPIES
Before attaching the canopies, first distinguish the
front canopy from the rear canopy. The rear canopy
will have a flap enclosure and a little bag with a zipper,
the front canopy will not have this.
FRONT CANOPY
(fig. 6)
The front canopy attaches to the brackets located at
the rear of the front seat armrest. Slide both canopy
brackets, at the same time, onto the stroller canopy
EN
EN
brackets until snapped in place (fig. 6).
REAR CANOPY
The rear canopy attaches to the brackets located at the
intersection of the handle tube and the rear seat armrest. Slide
both canopy brackets, at the same time, onto the stroller
canopy brackets until snapped in place. The rear canopy flap
enclosure snaps to the top of the rear seat (fig. 7).
(fig. 7)
TO ADJUST CANOPIES
Pull or push canopy to desired position (fig. 8).

TO ATTACH CHILD'S TRAY

(fig. 8)
Attach the child's tray onto the front frame leg tubes
as shown (fig. 9).
Close the locking latch by pressing inward. Pull to
release.
WARNING: Always secure your child with
the seat belt. The child's tray is not a
restraint device. DO NOT lift the stroller by
the child's tray. Use care when attaching the
(fig. 9)
child's tray on the stroller with a child in the
stroller.
16