topmark RILEY Mode D'emploi page 15

TO ATTACH FOOTREST
A. Lay stroller on its back so handle is on the floor.
B. Snap footrest onto leg tubes as shown (fig. 2).
TO ASSEMBLE FRONT WHEELS
A. Line up bottom of front leg with the wheel
assembly.
The swivel lock faces up (fig. 3).
B. Push wheel assembly on until it locks in place.
Repeat for other wheel.
Pull firmly on each wheel assembly to be sure the
wheel assemblies are securely attached.
TO RE ASSEMBLE FRONT WHEELS
First remove the child(ren) from the stroller.
Lift back the stroller on the rear wheel and push
bar. In the opening of the front wheel block you
feel a small part(fig.a); push it down with your
thumb or flat side of screw driver and pull of the
front wheel (fig.b).
TO ASSEMBLE REAR AXLE AND REAR WHEELS
A. Insert axle through the
rear axle/brake housing as
shown (fig. 4).
B. Slide wheel on axle.
Wheel will lock onto axle.
Repeat for other side.
Pull firmly on each wheel
to be sure the wheel
assemblies are securely
attached. To unlock the rear wheel press on the wheel cap in the middle of the rear
wheel (fig. 5).
ASSEMBLING
(fig.a)
(fig. 4)
15
(fig. 2)
(fig. 3)
(fig.b)
EN
(fig. 5)