Makita DCL184 Manuel D'instructions page 14

Installing or removing the blower
attachment
To attach the blower attachment, align the protrusion of
the blower attachment port with the groove on the vent,
and then push it until clicks.
Fig.31: 1. Blower attachment
To remove the blower attachment, pull the port down-
ward while pressing its top as illustrated.
Fig.32
Blowing
Fig.33
MAINTENANCE
CAUTION:
Always be sure that the tool is
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning
the cleaner using a cloth dampened in soapy water.
mounting area and the dust stopper.
Fig.34
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes weak. Dry it
may cause poor suction and shorten the service life of
the motor.
Fig.35
NOTE:
Removing and installing the sponge
CAUTION:
sure to install it on the cleaner. If washed in water,
Fig.36: 1.
area.
Fig.37: 1. Recessed wall
Storage
WARNING:
and charger in a car. The temperature inside a car
cause the battery cartridge deteriorated and result in
Fig.38
WARNING:
ing it in the storage bag. Blocking the air vent may
Fig.39
WARNING:
with on-vehicle inverter. It may cause abnormal
WARNING:
in a car. If the battery cartridge is exposed to the tem-
CAUTION:
Always store the hose as illus-
trated to avoid tripping, when the cleaner is not
used. Unfolded hose may catch your foot and cause
Fig.40: 1. Hook 2. Hose
14 ENGLISH
Never leave the battery cartridge
Never use the charger while stor-
Never charge the battery cartridge
Never charge the battery cartridge