Makita DCL184 Manuel D'instructions page 12

ASSEMBLY
CAUTION:
Always be sure that the tool is
before carrying out any work on the tool.
cleaner.
Use the dust stopper when installing either dust bag or
Dust bag are usable many times repeatedly by cleaning
it out.
NOTICE:
To prevent dust from getting into the
motor:
•
installed before use.
• Insert the dust stopper together with the
slots when installing them.
• Do not use a broken or ripped bag.
Otherwise the motor may be broken.
NOTICE:
Do not fold the cardboard at its open-
NOTICE:
Never throw away the dust stopper
because it needs to be used repeatedly whenever
NOTICE:
important component for maintaining the tool
performance. Using other than the genuine paper
Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
Fig.5: 1. Upper side of the dust stopper 2. Lower
side of the dust stopper
1. Insert the protrusion of the dust bag into the
The dust bag does not have distinction between the
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
Fig.6: 1. Dust stopper 2. Groove 3. Dust bag
2. Overlap the frame of dust stopper with that of the
dust bag.
Fig.7
3. Place the dust stopper and the dust bag together
into the cleaner cavity in the same direction of arrow on
the dust stopper. Insert them all the way into the slots in
the cleaner cavity.
Fig.8: 1. Slot
4. Place the entire cloth part of the dust bag inside
the cleaner itself.
Fig.9
5. Close the dust case cover completely.
Fig.10: 1. Dust case cover
NOTE: When the dust bag is not installed in
the cleaner, the dust case cover does not close
completely.
Be careful not to take the upper side for the lower side
Fig.11: 1. Upper side of the dust stopper 2. Lower
side of the dust stopper
1.
setting it on the dust stopper.
Fig.12
2.
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
Fig.13: 1. Dust stopper 2. Groove 3.
3. Overlap the frame of dust stopper with that of the
Fig.14
4.
together into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way into
the slots in the cleaner cavity.
Fig.15: 1. Slot
5.
inside the tool itself.
Fig.16
6. Close the dust case cover completely.
Fig.17: 1. Dust case cover
NOTE:
the cleaner, the dust case cover does not close
completely.
Installing the shoulder strap
CAUTION:
Be careful not to get the shoulder
strap caught by objects in your surroundings.
CAUTION:
Be careful not to slip the shoul-
the cleaner. For stable handling of the cleaner, it is
recommended to wear the shoulder strap crossed in
front of your chest.
Attach the hooks of the shoulder strap onto the mounts
Fig.18: 1. Shoulder strap 2. Hook 3. Mount
NOTE: You can also attach the shoulder strap to the
soft bag (optional accessory) as illustrated.
Fig.19: 1. Shoulder strap 2. Soft bag
12 ENGLISH