Publicité
Adjusting blade tension
Changing the blade
HOLZMANN Maschinen GmbH
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Proper blade tension is achieved if the blade
defects no more than 3-6 mm when it is firmly
moved by hand at the center location of the
blade.
To increase blade tension rotate the lever for the
sawblade tension clockwise.
NOTICE
Make sure the tracking adjustment
bolt is sitting in recess. See Picture.
Loosen screws and remove the guides.
Reduce the blade tension and remove
the blade.
Insert the new blade and re-assemble
the guides.
Adjust the required blade tension as
described above.
48
BBS550SMART
Publicité
