Publicité
15.2
Operation
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
Always disconnect the machine from the power supply before maintenance or
repair work and secure it against unintentional reconnection.
16.1
Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
•
Remove chips and dirt particles from the machine after each use with a proper tool.
•
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil
(e.g. WD40 rust inhibitor).
16.2
Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects
that could affect your safety must be repaired immediately!
•
Before each operation, check the perfect condition of the safety devices.
HOLZMANN Maschinen GmbH
WAR N I N G
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
6. Check level of lubrication tank and refill if
necessary.
NOTICE
Use only water with a light detergent
(soapy liquor; Washing up) as a coolant.
• Place a log onto the track and secure it with the
log assembled supports.
• Press the ON button.
• Wait until saw blade reaches maximum speed.
• Turn on the lubrication.
• Set desired cutting height.
• Slide saw head slowly over the track.
• Turn off the machine after completing operation
with the OFF-button.
N O TE
45
BBS550SMART
Publicité
