Publicité
6 Secure both side of the unit using the same method as step 1.
Mounting
CHAIN - OPTION
1 Place your fastening hooks on the strapping board, the
floor joists or underneath the concrete floor.
2 Attach a hanging chain to each screw paired with a
washer (provided) in the top 4 corners of the unit and
tighten.
3 Install a spring on each chain. Hook the spring in the
links so a loop is created in the chain. The spring will
then support the unit's weight and absorb vibrations.
4 Hang the unit by slipping a link onto the hanging hooks,
making sure the unit is level.
13
Publicité
