Technical Information; Notes About Using This Model For The First Time; Preparations - marklin 29322 Notice D'utilisation

4. Technical Information

Switched power pack:
Voltage supply train:
Power consumption of train
H0 Gauge (1:87 scale)
4.1 Overload Protection
A built-in overload protection protects the switched
power pack from damage in the event of an overload
or a short circuit. All lokomotives will be stopped.
See also point 10.
5. Notes about Using this Model for
the First Time
• The switched power pack may not be plugged
into the wall outlet yet.
• Set up the layout as shown in Part 6.

6. Preparations

6.1 Joining Track Sections and Setting up Track
When setting up the track, please note the track
numbers and the sequence for the track sections.
Putting track together
4
input 230 volts AC
output 18 volts DC/18VA
max 22 volts DC
max 13 VA
Taking
track apart
Layout
!
6.2 Connections for the Feeder Track
Important Note:
!
This feeder track is only to be connected
to the switched mode power pack included with
the set. Other switched mode power packs or
transformers are not authorized for use with this
feeder track!