Publicité
Caution! Do not attempt to lift weights beyond your physical reach. Please ask for assistance when setting up
your scooter. We also advise you to ask your dealer for help with handling.
k.
How do I change the batteries?
1. Remove the battery pack from the scooter and carefully place it on its side.
2. Remove the eight screws from the battery pack.
3. Place the positive battery up and remove the cover.
4. Disconnect the black (-) and red (+) electrodes from the batteries.
5. Remove the old batteries.
6. Place the new batteries in the battery pack.
7. Connect the red wire to the positive terminal of each battery (+).
8. Connect the black wire to the negative terminal of each battery (-).
9. Replace the cover and ensure that all the cables are securely inside the battery without being trapped.
10. Carefully turn the battery pack over.
11. Reinstall and tighten all the screws.
HOW IT WORKS
1.
Before getting on the scooter
- Check that the batteries are correctly charged. See Using the battery
- Check that the "Freewheel" mode is not activated. Cf. Rear mechanical components
- Make sure that the handlebars are in the unlocked position: so that you can steer the scooter.
2.
Getting on the scooter
- Make sure that the key is not in the switch. This will prevent your scooter from moving accidentally.
- Make sure the seat is securely fastened before you sit down.
- Make sure your feet are touching the base.
3.
Adjustment and pre-drive check
- Is the seat at the right height?
- Is the seat properly secured?
- Is the key correctly inserted in the ignition? Is it turned to the "on" position?
- Does the horn work properly?
- Are there pedestrians, animals or obstacles in the way?
- Does your route include slopes or unstable terrain?
Version Février 2024
Page 30 sur 53
Publicité
