Publicité
WARNING! The dashboard must not be exposed to wet conditions. If the scooter is stored in a damp environ-
ment or in the rain, do not use it until the dashboard is completely dry.
1. Horn
Press this button to start the horn. To be used in the event of danger.
2. Key switch
Place the key in the key switch and turn clockwise to start the scooter. Turn the key anticlockwise to switch the
scooter off.
CAUTION: If you turn the key to the "off" position while the scooter is running, the electronic brake will engage
and the scooter will stop automatically.
3. Battery level meter
After starting the scooter, the battery status meter displays the battery power.
4. Setting the speed
You can use the speed control dial to select the scooter's minimum or maximum speed.
5. Travel buttons
You can use these buttons to control the forward and reverse direction of the scooter. Place your left and right
hands on the left and right handle respectively.
Push the right button with the right thumb and the scooter will move forwards. Push the left button with the
left thumb and the scooter will move backwards. When you release both hands from these buttons, the scooter
will stop moving forward.
6. Light
You can use this button to control the scooter's lighting system. Push the button forwards and the light will
come on. Push the button backwards and the light will go out.
B. Rear mechanical components
Version Février 2024
Page 24 sur 53
Publicité
