Technical Data - IKA RW 47 D Mode D'emploi

Technical data

Sped range
50Hz stage I
50Hz stage II
60Hz stage I
60Hz stage II
Max. torque stirrer shaft (Overload)
Max. torque stirrer shaft
Max. torque stirrer shaft
Permitted on-time:
Speed adjustment:
Speed display:
Motor dates
Design voltage:
Design frequency:
Motor speed:
Input power:
Output power:
Maximum output at stirrer shaft:
Overall efficiency:
Protection type to DIN EN 60529:
Exess voltage category:
Protection class:
Contamination level:
Protection at overloaded:
Perm. ambient temperature:
Perm. ambient humidity: (rel.)
Operating position:
Drive:
Maximum stirring quantity - water:
for high-viscosity (HV):
Clamping chuck - clamping range:
Hollow shaft internal diameter:
Stand attachment:
Housing:
Dimension without extension arm: (WxDxH)
Weight
Operation at a terrestrial altitude
16
min -1 57 - 275
min -1 275 – 1300
min -1 69 - 330
min -1 330 – 1560
Ncm 4642 ( with 57 1/min )
Ncm 3000 ( with 100 1/min )
Ncm 285 ( with 1000 1/min )
% 100
- mechanical rotary button
- on the side speed label
VAC 3x400 Y 3x230 ∆
Hz 50 50
min -1 2880 2850
W 554 548
W 370 370
W 300
% 54
- IP 44
- II
- I (protective earth)
- 2
- overcurrent and undervoltage switch
°C +5 to+40
% 80
- on stand, clamping chuck pointing down
- Rib cooled three-phase motor with friction wheel drive
and subsequent 2-stage toothed gear train
ltr 200
mPas 10000-100000
mm 3 - 16
mm 13 (to short before the internal housingupper edge)
- Flange on housing lower part
- Al, hermoplastic
mm 145x445x340
kg 15
m max. 2000 above sea level
3x400 Y 3x230 ∆
60 60
3425 3425
489 490
370 370
on the three-phase motor
RW47D102003