Publicité
Remove the application tools before transporting the
u
power tool. This will allow you to avoid damage.
Bonded cutting and grinding discs have an expiration
u
date, after which the discs must no longer be used.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 29).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
Technical Data
Angle grinder
Article number
Rated power input
Power output
A)
Rated no-load speed
Speed adjustment range
Max. grinding disc diameter/rubber
sanding pad diameter
Bosch Power Tools
(2) Spindle lock button
(3) Speed preselection thumbwheel
(GWS 18-125 SL / GWS 18-125 SPL)
(4) Unlocking lever for on/off switch
(5) On/off switch
(6) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(7) Standard auxiliary handle (insulated gripping sur-
face)
(8) Direction-of-rotation arrow for grinding spindle
(9) Extraction guard for grinding
(10) Protective guard for grinding
(11) Protective guard for cutting
(12) Cover for cutting
(13) Mounting flange with O‑ring
(14) Carbide grinding head
(15) Grinding disc
(16) Disc brush (dia. 22.22 mm)
(17) Disc brush (M14)
(18) Cutting disc
(19) Diamond cutting disc
(20) Clamping nut
(21) Quick-clamping nut
(22) Two-pin spanner for clamping nut
(23) Handle (insulated gripping surface)
(24) Grinding spindle
(25) Hand guard
(26) Rubber sanding pad
(27) Sanding sheet
(28) Round nut
(29) Cup brush
(30) Conical brush
(31) Diamond annular cutter
(32) Open-ended spanner
(33) Extraction guard for cutting with cutting guides
a) This accessory is not part of the standard scope of delivery.
GWS 18-125 L GWS 18-125 PL GWS 18-125 SL GWS 18-125 SPL
3 601 GA3 0..
3 601 GA3 1..
W
1800
W
1145
–1
min
12,000
–1
min
–
mm
125
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
3 601 GA3 2..
1800
1800
1145
1145
12,000
12,000
–
2800–12,000
125
125
1 609 92A 76D | (13.05.2024)
English | 23
a)
3 601 GA3 3..
1800
1145
12,000
2800–12,000
125
Publicité
