Publicité
*Note: 1. The distance from the base support to the ground is decided according to the local
regulations. And it is also the distance from the base to the ground. For the safety concerns, it is
suggested that the height from the ground not be too high.
2. Leave enough distance to the ceiling to install the inverter.
3
3.Check whether the bubble is in the centre, if not, slightly bow it to the horizontal.
*Note: 1. An electric drill dust collector is recommended.
4
2. Prevent dust from being released into the hot plug when drilling holes.
5
Ground
Ø15mm Drill
≥ 110 mm
Cylindrical plastic
bubble spirit level
Concrete wall
90°
20-25 N·m
129
Publicité
