Publicité
•
Floor Mounting / Bodenmontage / Montage au sol / Montaje en suelo / Montagem
em pavimento / Vloermontage / Montaggio a pavimento / Montaż podłogowy /
Montáž na podlahu / Golvmontering / Montare pe pardoseală / Подов монтаж /
Gulvmontering / Στερέωση στο δάπεδο / Põrandakinnitus / Lattia-asennus / Montaža
na pod / Padlós szerelés / Montavimas ant grindų / Grīdas montāža / Montáž na
podlahu / Montaža na tleh / Zemine montaj / Montagem no piso / تصاعد الكلمة
The mode of floor mounting is given priority for installation. Take the installation procedure
Option C (with 3 battery modules) as an example.
One Tower
Step 1 Prepare and install the base and battery modules.
Base
1
*Note: Remove dust covers from the base, battery module, and BMS before conducting installation.
The side with "R" shall be against
the wall.
Place a spirit level to check
whether the base is even.
2
If yes, refer to the step 4.
If no, refer to the step 3.
Battery module
Rotate the adjustment screws to ensure the base is even.
Turn clockwise, lower the base
Turn anticlockwise, raise the base
3
BMS
Front
119
Publicité
