Publicité
*When drilling holes, make sure the already installed part is covered to prevent dust from
falling onto the device.
7
As for securing
brackets, refer to
Steps 5 to 9.
8
9
6
*Note: 1. An electric drill dust
collector is recommended.
2. To prevent dust from being
released into the hot plug when
drilling holes, users may use the
package bag of the device or
other materials to fully cover the
battery module.
3. Please make sure that the
corners and edges of the battery
modules are aligned before
tightening screws.
Remove the dust cover.
Ø10 drill
Depth: >60 mm
123
Publicité
