Terminals and Parts of Mechanical
Terminals and Parts of Mechanical / Terminals und Teile der Mechanik / Bornes et
pièces mécaniques / Terminales y partes mecánicas / Terminais e partes mecânicas /
Terminals en onderdelen van de mechanica / Terminali e parti meccaniche / Terminale
i części mechaniczne / Terminály a mechanické části / Terminaler och mekaniska
delar / Terminale și piese mecanice / Терминали и механични части / Terminaler
og mekaniske dele / Τερματικά και μηχανικά μέρη / Terminaalid ja mehaanilised
osad / Liittimet ja mekaaniset osat / Terminali i mehanički dijelovi / Terminálok és
mechanikai alkatrészek / Terminalai ir mechaninės dalys / Termināļi un mehāniskās
daļas / Terminali in mehanski deli / Terminali in mehanski deli / Terminaller ve mekanik
parçalar / Terminais e peças mecânicas / ةيكيناكيملا ءازجأو فارطأ
• Battery (T-BAT-SYS)
BMS (TBMS-MCS0800E)
The hot-plug
interface is
connected to the
battery module.
Left side
BMS Button:
BAT SWITCH:For battery's
Start system
input and output
COM port: Connect the COM
B+
port of the series box (if any)
DIP
Switch:Realize
battery's parallel
function
Right side
B-
The hot-plug
interface is
connected to the
inverter.
B+
HEAT port: Connect the
HEAT port of the series
box (if any), or a short-
COM
HEAT
B-
circuit plug must be
inserted into the port.
GND:Connect the
grounding port of
the series box (if any)
115