Publicité
An Introduction to X1-IES-A system
Inverter
BMS
Battery modules
Base
• "X1-IES-A system" can be used to optimize self consumption, store in the battery for
future use or feed into public grid.
• "X1-IES-A series inverter" (inverter for short) refers to Single-phase energy storage inverter
that can control battery and grid-connected charge or discharge.
• "T-BAT-SYS-HV-S50E" (T-BAT-SYS for short) is the name of battery system. It includes
BMS, battery modules, base, cover and series box.
• "BMS" is an electronic system that manages rechargeable batteries. It is installed on
battery module (s). Its model name is TBMS-MCS0800E.
• "Battery module" is an electrical battery that can charge or discharge loads. It is installed
under a BMS or a cover. Its model name is TP-HS50E.
• "Base" is used to support the batteries. It is installed under the battery module (s).
• "Cover" is installed on the top battery module of the expansion battery tower.
• "Series box" is used to connect the two towers through wiring. It is installed on the top
battery module of the expansion battery tower and inside the "cover".
102
Cover
( with series
box inside )
Battery modules
Base
Publicité
