EN
BEFORE CALLING SERVICE
34
If the doors are not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door gaskets broken or torn?
• Is your fridge on a level surface?
If the edges of fridge cabinet that the door joint contact are warm;
Especially in summer (hot weather), the surfaces that the joint contact
may get warmer during the operation of the compressor, this is normal.
IMPORTANT NOTES:
• Compressor protection thermal fuse will be blown after sudden
power breakdowns or after unplugging the appliance, because the
gas in the cooling system is not stabilized yet. Your fridge will start
after 4 or 5 minutes, there is nothing to worry about.
• The cooling unit of your refrigerator is hidden in the rear wall.
Therefore, water droplets or icing may occur on the rear surface
of your fridge due to the operation of the compressor in specified
intervals. This is normal. There is no need to perform a defrosting
operation unless the icing is excessive.
• If you will not use your fridge for a long time (e.g. in summer holidays),
unplug it. After defrosting, clean your fridge and leave the door open
to prevent humidity and smell.
• If the problem persists after you have followed all the instructions
above, please consult to the nearest Authorized Service.
• The appliance you have purchased is designed for home type use
and can be used only at home and for the stated purposes. It is not
suitable for commercial or common use. If the consumer use the
appliance in a way that does not comply with these features, we
emphasize that the producer and the dealer shall not be responsible
for any repair and failure within the guarantee period.
Comformity Information
• This equipment is designed for use at an ambient tem-perature
within the 16°C - 32°C range.
• The appliance is designed in compliance with the IEC60335-1 /
IEC60335-2-24, 2004/108/EC standards.